The three-dimensional bendability of the AE provides designers with a high degree of “application flexibility” compared to traditional heating. The flexible tubular heaters compress into the groove and provide excellent heat transfer. Engineered with a robust design incorporating greater thermal mass, our flexible heater is user formable with a flexible solid casing that stays in the groove, yet it is easy to install.

 

FACTS

 

• Easy installation with a uniform finish
• Can be formed by hand
• No special installation tools required
• Rapid heat-up times
• Minimal temperature difference between heater sheath and heated tool
• Reduced energy costs: tool mass can be reduces
• CE certified product

 

Technical specifications:

 

ELECTRICAL SPECIFICATION

    
Resistance                               : +10% – 5%
Wattage                                   : +5% – 10%
Voltage                                    : 110 V AC to 480 V AC
Maximum Watt Density        : 7 watt/mm2
Maximum temp.                    : 550°C

High voltage test                    : 1000 V AC

Insulation resistance:            : 5 M OHMS at 500 V DC

 

DIMENSIONAL SPECIFICATION

 

Minimum dia.                           : 6 mm
Diameter tolerance                 : +/- 0.07mm
Length tolerance:                    : +/- 1%
Cold length:                              : 38mm (1.5 inches)

 

STANDARD SIZES AVAILABLE

 

DIAMETER 6.5mm WITH THREADED PINS M2.5 (230V) LENGTH IN mm
LENGTH	WATTAGE
300	350
350	400
400	500
450	600
500	650
550	700
600	800
650	850
700	900
750	1000
800	1100
850	1200
900	1300
950	1350
1000	1400
1050	1450
1100	1500
1150	1550
1200	1600
1250	1650
1300	1700
1350	1800
1400	1900
1450	2000
1500	2100

 

 

 

DIAMETER 8 / 8.2 / 8.5 mm WITH THREADED PINS M2.5 & M4 (230V) LENGTH IN mm
LENGTH	WATTAGE
400	800
450	900
500	1000
550	1150
600	1250
650	1400
700	1500
750	1600
800	1750
850	1850
900	1950
950	2100
1000	2200
1050	2300
1100	2450
1150	2550
1200	2650
1250	2800
1300	2900
1350	3000
1400	3150
1450	3250
1500	3350